CAMBOX V4 PRO

UPDATE

Please download the latest version of your Cambox embedded firmware.

V.1.2.3

Update of July 30th 2021

How to process to the update

In order to update your Cambox, please respect the following steps :

1 - Make sure your Cambox is off

2 - Take the SD card out of your camera and insert it in your computer.

3 - Download the latest update available

4 - Insert the downloaded file (without opening it) at the root of your camera SD card.

5 - Insert the SD card back into your Cambox.

6 - Turn on your Cambox (Power led flashes during the update)

7 - Wait until the end of the update and wait for the unit to turn off automatically (approximately 5 minutes)

8 - Restart your Cambox

The update has been completed.

PREVIOUS UPDATES

Here is the history of the latest updates.

Version 1.2.3

Addition of the file deletion feature

Feature to visualize media files stored on the SD card from the web server

Video gallery feature (playback footage, download, delete) from the app

Limitation of the number of connection via wifi to the product to 1

Optimization of the preview mode that could result in camera freeze

During camera initialization process, the recording mode is automatically reactivated by default

Version 1.2.2

Change of camera LEDs status during OTA update procedure :

- OTA update "processing" => White LED blinking

- OTA update "successful" => White LED turns solid for 5 seconds then the camera automatically turns off

- OTA update "failed" => White LED is blinking quickly and you need to turn the camera off manually

New label of the Cambox SD card when turning on the camera under the name "CAMBOX V4"

Version 1.2.1

New status LED color when the Cambox is plugged to a laptop (previous color : blinking purple / new color : solid red)

Change of the default video file duration to 5 minutes

Deactivation of the wifi connection once the wifi button is pressed

Version 1.2.0

Camera powering off protocol fix

Camera starting protocol fix after connecting the camera to macOS devices

RTSP video stream management optimization

Change of the blue Power LED when RTSP video stream is activated

Addition of the feature allowing to format the memory card from the mobile app

Addition of the feature allowing to force the camera extinction from the mobile app

Addition of the SD card format from macOS

Version 1.1.9

Integration of the RTSP stream to enable the video preview mode feature on the mobile app

Switch from video preview mode to recording mode without turning off the Cambox

Addition of the USB MSC (Mass Storage) protocol allowing to recognize the camera on all types of devices

Addition of the battery voltage reading via CGI request

Version 1.1.8

Change of the camera default settings

Modification of the white balance default value : Previous value = 12 (warm color) // New value = 0 (Automatic)

Optimization of the default picture sharpness : Previous value = 7 // New value = 12

Reduction of image noise (Edge strenght) : Previous value = 7 // New value = 12

Version 1.1.7

Optimization of the energy control feature : smoothes the values to avoid detection peaks

Addition of the blinking white Power LED during the OTA update

Version 1.1.6

Update of the camera date and time

Process for remote Cambox update (OTA file : Over The Air)

Automatic shutdown of the camera once update has been completed

Verification of the presence of the config.ini file and automatic creation of this file if it is missing from the SD card

Verification of the SD card presence and compatibility. In case of default, the power LED will blink purple.

Addition of the battery energy control. Low battery = Battery LED blinking red // Critical battery = Batttery LED solif red & automatic save of the last video file

Version 1.1.5

Optimization of the required time to use the Power button (pause mode / launch video record / powering off)

Activation of the white LED to signal the ignition phase of the camera

Change of the LED color during recording phase : Green LED = Recording // Red LED = camera is paused

LED brightness management via the config.ini file

Audio correction

SD card presence verification